In an earlier post I made an
External / Internal source input switch to go in the default Reason template. This is an alteration to that patch, which adds a Stereo / Mono input switch, useful when sampling a mono instrument and removes the need to fiddle with the cables in the back of the rack.
You can
download the "mrfprod_Default.reason" file here or follow the instructions below.
My default patch uses the
A/B Audio & CV Switch and the
ReMark Rack Divider, both which can be downloaded for free from Propellerhead Shop.
The instructions below assumes that you've first made the
External/Internal switch.
The Sampling Input Source & Stereo/Mono Switcher Patch:
 |
| 1. Switch to the back and create a new A/B Switch named "Input" and a new Spider Audio unit, named "Stereo / Mono". |
 |
| 2. Move L & R cables from the Source switch outputs to the Input switch outputs. |
 |
| 3. Connect Source switch outputs to the stereo/mono spider split inputs. |
 |
| 4. Connect the first L&R split outputs to Input Switch input A L&R. |
 |
| 5. Connect the next two splitter L&R outputs to the merge sections first two Left inputs. |
 |
| 6. And finally, connect the Stereo/Mono spider's Left merge output to Left Input B on the Input switch. |
 |
| The final result! |
There you have it! Switch easily between a stereo or mono signal, from an internal or external sound source!
If you found this useful, please leave a comment! :)
No comments:
Post a Comment